WIAG-IBR100 Itaba Zero Section flow sensor

Technical parameters

Pipe size: 200-15000 mm;

Applicable pressure: -0.03 to 1.6MPa;

Operating temperature: -40 to 550℃

Accuracy grade: ±1%

Reproducibility: ±0.1%

Applicable pipe diameters: Round and square pipes ranging from 50 to 15,000 mm;

Applicable medium: Air and other low-humidity, dust-containing gases;

Measured medium: pure gas, flue gas, coal gas, dirty gas, gas containing a large amount of dust or tar;

Parameters

Technical parameters

Pipe size: 200-15000 mm;

Applicable pressure: -0.03 to 1.6MPa;

Operating temperature: -40 to 550℃

Accuracy grade: ±1%

Reproducibility: ±0.1%

Applicable pipe diameters: Round and square pipes ranging from 50 to 15,000 mm;

Applicable medium: Air and other low-humidity, dust-containing gases;

Measured medium: pure gas, flue gas, coal gas, dirty gas, gas containing a large amount of dust or tar;

Product Detail

Product Features

Dual-channel acceleration effectively outputs a greater differential pressure value

The rectification design of the pressure tapping measurement point effectively adjusts the airflow disorder phenomenon and minimizes the signal pulsation to the greatest extent

The entire measurement device adopts a pressure equalization and buffering structure, and the differential pressure signal output is stable

The pressure tapping and measurement point adopts a through-type structure with an inlet at the front end and an outlet at the rear end, featuring excellent anti-clogging performance and self-cleaning function

The plug-in installation method is simple to install, convenient to maintain and has low pressure loss

Fully achieve installation without straight pipe sections.