WIAG-IBR400 Itaba thermal flow sensor

Technical parameters

Pipe size: 80-6000 mm;

Applicable pressure: 0MPa to 4MPa;

Applicable temperature: -4 to 350℃, special 550℃;

Flow rate range: 0.1 to 250Nm/s(under standard conditions of 20℃, 101.33KPa);

Accuracy grade: ±1%

Reproducibility: ±0.1%

Applicable medium: Air and other low-humidity, dry gases;

Parameters

Technical parameters

Pipe size: 80-6000 mm;

Applicable pressure: 0MPa to 4MPa;

Applicable temperature: -4 to 350℃, special 550℃;

Flow rate range: 0.1 to 250Nm/s(under standard conditions of 20℃, 101.33KPa);

Accuracy grade: ±1%

Reproducibility: ±0.1%

Applicable medium: Air and other low-humidity, dry gases;

Product Detail

Product Features

All-digital signal processing offers higher precision and better stability. It measures the mass flow rate of gas without the need for temperature or pressure compensation

An ultra-wide range ratio of 1:2500, with a measurement range from 0.1 Nm/s to 250 Nm/s

No pressure loss, applicable to pipes of any shape with known cross-sectional area

Corrosion-resistant sensor, suitable for measuring corrosive gases

Insertable sensors can be installed and maintained online

The fully isolated electrical structure completely filters out interference

It has a data recording function with 10,000,000 recording points

It features Bluetooth functionality, allowing for wireless sensor configuration and data transmission

It is standardly equipped with RS485 Modbus RTU interface and 4~20mA current/pulse output

There is no zero drift, making the measurement more accurate. Coupled with ultra-high-precision sampling, the lower limit of measurement is the lowest of 0.1Nm/s among similar flowmeters on the market

Full digital control measurement prevents the sensor from being affected by water or contaminants, which could lead to excessive heating power and damage to the sensor